• Welcome to Thaidevtalk.com โปรแกรมเมอร์คุยกัน.

Linux อ่าน smartcard ด้วย python

Started by อั๋น ทรงวุฒิ, 23 August 2021, 10:57:36 AM

Previous topic - Next topic

อั๋น ทรงวุฒิ

sudo apt install swig
sudo apt-get install python3-dev pcscd
sudo apt install libpcsclite-dev  python-pil
pip3 install pyscard image

sudo systemctl enable pcscd.service
sudo systemctl start pcscd.service
sudo systemctl status pcscd.service

อั๋น ทรงวุฒิ

#  install pcscd python-pyscard python-pil
import os
import io
import binascii
import sys
#import traits
import codecs
from PIL import Image
from smartcard.System import readers
from smartcard.util import HexListToBinString, toHexString, toBytes
# Thailand ID Smartcard
def thai2unicode(data):
result = ''
result = bytes(data).decode('tis-620')
return result.strip();
def getData(cmd, req = [0x00, 0xc0, 0x00, 0x00]):
data, sw1, sw2 = connection.transmit(cmd)
data, sw1, sw2 = connection.transmit(req + [cmd[-1]])
return [data, sw1, sw2];
# Check card
SELECT = [0x00, 0xA4, 0x04, 0x00, 0x08]
THAI_CARD = [0xA0, 0x00, 0x00, 0x00, 0x54, 0x48, 0x00, 0x01]
CMD_CID = [0x80, 0xb0, 0x00, 0x04, 0x02, 0x00, 0x0d]
# TH Fullname
CMD_THFULLNAME = [0x80, 0xb0, 0x00, 0x11, 0x02, 0x00, 0x64]
# EN Fullname
CMD_ENFULLNAME = [0x80, 0xb0, 0x00, 0x75, 0x02, 0x00, 0x64]
# Date of birth
CMD_BIRTH = [0x80, 0xb0, 0x00, 0xD9, 0x02, 0x00, 0x08]
# Gender
CMD_GENDER = [0x80, 0xb0, 0x00, 0xE1, 0x02, 0x00, 0x01]
# Card Issuer
CMD_ISSUER = [0x80, 0xb0, 0x00, 0xF6, 0x02, 0x00, 0x64]
# Issue Date
CMD_ISSUE = [0x80, 0xb0, 0x01, 0x67, 0x02, 0x00, 0x08]
# Expire Date
CMD_EXPIRE = [0x80, 0xb0, 0x01, 0x6F, 0x02, 0x00, 0x08]
# Address
CMD_ADDRESS = [0x80, 0xb0, 0x15, 0x79, 0x02, 0x00, 0x64]
# Photo_Part1/20
CMD_PHOTO1 = [0x80, 0xb0, 0x01, 0x7B, 0x02, 0x00, 0xFF]
# Photo_Part2/20
CMD_PHOTO2 = [0x80, 0xb0, 0x02, 0x7A, 0x02, 0x00, 0xFF]
# Photo_Part3/20
CMD_PHOTO3 = [0x80, 0xb0, 0x03, 0x79, 0x02, 0x00, 0xFF]
# Photo_Part4/20
CMD_PHOTO4 = [0x80, 0xb0, 0x04, 0x78, 0x02, 0x00, 0xFF]
# Photo_Part5/20
CMD_PHOTO5 = [0x80, 0xb0, 0x05, 0x77, 0x02, 0x00, 0xFF]
# Photo_Part6/20
CMD_PHOTO6 = [0x80, 0xb0, 0x06, 0x76, 0x02, 0x00, 0xFF]
# Photo_Part7/20
CMD_PHOTO7 = [0x80, 0xb0, 0x07, 0x75, 0x02, 0x00, 0xFF]
# Photo_Part8/20
CMD_PHOTO8 = [0x80, 0xb0, 0x08, 0x74, 0x02, 0x00, 0xFF]
# Photo_Part9/20
CMD_PHOTO9 = [0x80, 0xb0, 0x09, 0x73, 0x02, 0x00, 0xFF]
# Photo_Part10/20
CMD_PHOTO10 = [0x80, 0xb0, 0x0A, 0x72, 0x02, 0x00, 0xFF]
# Photo_Part11/20
CMD_PHOTO11 = [0x80, 0xb0, 0x0B, 0x71, 0x02, 0x00, 0xFF]
# Photo_Part12/20
CMD_PHOTO12 = [0x80, 0xb0, 0x0C, 0x70, 0x02, 0x00, 0xFF]
# Photo_Part13/20
CMD_PHOTO13 = [0x80, 0xb0, 0x0D, 0x6F, 0x02, 0x00, 0xFF]
# Photo_Part14/20
CMD_PHOTO14 = [0x80, 0xb0, 0x0E, 0x6E, 0x02, 0x00, 0xFF]
# Photo_Part15/20
CMD_PHOTO15 = [0x80, 0xb0, 0x0F, 0x6D, 0x02, 0x00, 0xFF]
# Photo_Part16/20
CMD_PHOTO16 = [0x80, 0xb0, 0x10, 0x6C, 0x02, 0x00, 0xFF]
# Photo_Part17/20
CMD_PHOTO17 = [0x80, 0xb0, 0x11, 0x6B, 0x02, 0x00, 0xFF]
# Photo_Part18/20
CMD_PHOTO18 = [0x80, 0xb0, 0x12, 0x6A, 0x02, 0x00, 0xFF]
# Photo_Part19/20
CMD_PHOTO19 = [0x80, 0xb0, 0x13, 0x69, 0x02, 0x00, 0xFF]
# Photo_Part20/20
CMD_PHOTO20 = [0x80, 0xb0, 0x14, 0x68, 0x02, 0x00, 0xFF]
# Get all the available readers
readerList = readers()
print ('Available readers:')
for readerIndex,readerItem in enumerate(readerList):
print(readerIndex, readerItem)
# Select reader
readerSelectIndex = 0 #int(input("Select reader[0]: ") or "0")
reader = readerList[readerSelectIndex]
print ("Using:", reader)
connection = reader.createConnection()
atr = connection.getATR()
print ("ATR: " + toHexString(atr))
if (atr[0] == 0x3B & atr[1] == 0x67):
req = [0x00, 0xc0, 0x00, 0x01]
else :
req = [0x00, 0xc0, 0x00, 0x00]
# Check card
data, sw1, sw2 = connection.transmit(SELECT + THAI_CARD)
print ("Select Applet: %02X %02X" % (sw1, sw2))
data = getData(CMD_CID, req)
cid = thai2unicode(data[0])
print ("CID: " + cid)
# TH Fullname
data = getData(CMD_THFULLNAME, req)
print ("TH Fullname: " +  thai2unicode(data[0]))
# EN Fullname
data = getData(CMD_ENFULLNAME, req)
print ("EN Fullname: " + thai2unicode(data[0]))
# Date of birth
data = getData(CMD_BIRTH, req)
print( "Date of birth: " + thai2unicode(data[0]))
# Gender
data = getData(CMD_GENDER, req)
print ("Gender: " + thai2unicode(data[0]))
# Card Issuer
data = getData(CMD_ISSUER, req)
print ("Card Issuer: " + thai2unicode(data[0]))
# Issue Date
data = getData(CMD_ISSUE, req)
print ("Issue Date: " + thai2unicode(data[0]))
# Expire Date
data = getData(CMD_EXPIRE, req)
print ("Expire Date: " + thai2unicode(data[0]))
# Address
data = getData(CMD_ADDRESS, req)
print ("Address: " + thai2unicode(data[0]))
photo = getData(CMD_PHOTO1, req[0])
photo += getData(CMD_PHOTO2, req[0])
photo += getData(CMD_PHOTO3, req[0])
photo += getData(CMD_PHOTO4, req[0])
photo += getData(CMD_PHOTO5, req[0])
photo += getData(CMD_PHOTO6, req[0])
photo += getData(CMD_PHOTO7, req[0])
photo += getData(CMD_PHOTO8, req[0])
photo += getData(CMD_PHOTO9, req[0])
photo += getData(CMD_PHOTO10, req[0])
photo += getData(CMD_PHOTO11, req[0])
photo += getData(CMD_PHOTO12, req[0])
photo += getData(CMD_PHOTO13, req[0])
photo += getData(CMD_PHOTO14, req[0])
photo += getData(CMD_PHOTO15, req[0])
photo += getData(CMD_PHOTO16, req[0])
photo += getData(CMD_PHOTO17, req[0])
photo += getData(CMD_PHOTO18, req[0])
photo += getData(CMD_PHOTO19, req[0])
photo += getData(CMD_PHOTO20, req[0])
data = HexListToBinString(photo)
f = open(cid + ".jpg", "wb")
f.write (data)
# Exit program

Quick Reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Please leave this box empty:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
ระบบภาษาไทยในดอส 6.2 (ไทยแอลเอส-พิมพ์เป็นตัวพิมพ์เล็กหมด):
Shortcuts: ALT+S post or ALT+P preview